4 MIN. READ
Key takeaways:
- Breakers are more likely to fail in the spring due to the added electrical load from your HVAC system.
- There are usually warning signs, like breakers that trip often.
- JAXSL can replace struggling breakers and detect electrical issues early through inspections.
We talked with our technicians, and they all agree: Your panel’s breakers are a lot more likely to fail in the spring.
Why is that? As temperatures rise in Eastern Pennsylvania, you go from having your furnace running most of the time to using your AC system more.
Let’s take a closer look at what’s really happening when you get your AC system on in the spring, and why breaker failure in Eastern Pennsylvania is a common issue.
What Really Causes Breaker Stress in the Spring?
Your furnace has been working hard all winter to keep you warm, and your electrical panel has been powering it around the clock. This can put stress on your electrical system and bring old breakers close to failure.
Next, when your AC comes on after sitting idle for a while, it can create additional stress for your breakers:
- If you skipped your usual seasonal HVAC tuneup, your AC system might come online with a wide range of small issues.
- Things like dirty coils, a weak capacitor, or loose electrical connections mean your HVAC system isn’t going to be efficient. It’s going to draw more power and might cycle more frequently, which could strain your breakers.
- Plus, an HVAC system uses much more power at startup than a furnace. This startup load can take a toll on breakers that are already close to failing.
HVAC usage isn’t the only thing that can affect your breakers in the spring. Storms can cause power surges that an aging panel may struggle to handle, and you might be powering more devices than usual, such as sump pumps, dehumidifiers, or electric gardening tools.
Top Signs Your Breakers Are Struggling
Electric breakers rarely fail without giving you some warning signs. The issue is that spotting these signs can be difficult if you don’t know what you’re looking for.
If you notice any of the following, call an electrician to have your panel and breakers checked:
- A breaker that trips repeatedly on the same circuit, even after you reduce what’s plugged in.
- The breakers or the panel are feeling warm or hot to the touch.
- Buzzing, crackling, or humming sounds are coming from the panel.
- A burning smell near the panel or coming from outlets.
- Discoloration, scorch marks, or melted plastic on breakers or wiring.
- Lights flickering or dimming when large appliances or your HVAC start.
It’s also a good idea to have a pro check your electrical panel if your electrical systems are aging. On average, panels can last 25 to 40 years, and breakers can have a similar lifespan as long as you don’t overload your circuits.
We recommend scheduling an electrical inspection if your equipment is getting old. It’s much cheaper to catch and address issues early than to find yourself in urgent need of electrical repairs after your equipment fails.
What Can Electricians Do About Struggling Breakers?
There are a few possible solutions if you’re having problems with your breakers:
- A common repair is to simply replace an old breaker with a newer one. Breakers wear out over time, and a new one will do a much better job of protecting the circuit it’s installed on.
- In some cases, breakers can age more quickly when overloaded. This can be a sign that you need more circuits installed to spread your electricity usage more evenly.
- Sometimes, breakers can trip and get damaged because the wiring is old and causes issues. An electrician can spot these issues and replace old wiring.
A licensed electrician will do a thorough inspection if you’re having problems with your breakers. If they don’t find any underlying issues, they will replace old breakers with new ones.
However, breaker failures can be a sign that your electrical system is overloaded or that other components are aging. It’s important to detect these issues early because they can lead to costly repairs down the line.
Prepare for the Spring With JAXSL
Don’t wait for your breakers to struggle when you turn on your AC. Schedule an electrical inspection with JAXSL, and we’ll make sure your home is ready to handle your HVAC and other electrical loads this spring and summer.
Give us a call at 844-452-9538 to schedule an electrical inspection for the spring or discuss repair options if your breakers are acting up.
FAQ
Why do breakers seem to fail more in the spring?
Spring can put extra stress on your electrical system. When your AC or heat pump kicks on after sitting idle all winter, it adds a heavy, frequent load on top of whatever your furnace has already put your panel through.
How can I tell if a breaker is struggling?
Common warning signs include:
- A breaker that trips repeatedly on the same circuit
- Breakers or the panel feeling warm or hot to the touch
- Buzzing, crackling, or humming from the panel
- A burning smell or visible scorch marks on breakers or wiring
- Lights that flicker or dim when large appliances or your HVAC start up
If you notice any of these, it’s time to call an electrician.
How long do panels and breakers usually last?
Many residential panels are designed to last around 25 to 40 years when properly loaded and maintained. Breakers can last just as long, but frequent tripping, overloading, and heat can shorten their lifespan.