Why Homes in Allentown and Bethlehem Need Electrical Panel Upgrades for Modern Electrification

Once you have a new panel in place, it becomes easier to meet modern power demands without overloading your infrastructure.
Once you have a new panel in place, it becomes easier to meet modern power demands without overloading your infrastructure.

3 MIN. READ

Key takeaways:
  • Many homes in the Allentown and Bethlehem area have outdated electrical panels.
  • Replacing your old panel makes your home safer and is a first step toward electrification.
  • JAXSL can help you determine if you need a panel upgrade.
Did you know that a quarter of homes in the Lehigh Valley were built before WWII? If you’re living in one of these older homes (or even more recent construction), chances are that your electrical infrastructure was never designed for modern power demands.
Luckily, you can bring this infrastructure up to date, starting with an electrical panel upgrade in Allentown, PA, and Bethlehem, PA.

Is Your Electrical Panel Outdated?

The answer is probably. Allentown and Bethlehem have a diverse mix of historical homes, early-20th-century buildings, and more recent builds.
While many homes have a 100-amp panel, you can still find older properties that still operate on a 60-amp model. This creates issues as modern power demands far exceed the capacity of a 60-amp panel (and some homes with 100-amp panels struggle to keep up if you have some high-usage applications like EV charging or a heat pump).
An electrical panel can become outdated for other reasons:
  • Some makes and models have been recalled for safety reasons.
  • Old breaker boxes are unsafe and should be replaced with modern panels featuring breakers.
  • Electrical panels last 25 to 40 years on average. If your panel is nearing the end of its lifespan, it’s time to consider a replacement.

Your Electrical Panel and Modern Power Demands

Before deciding on a panel upgrade, it’s important to understand how modern homes use electricity.
Your main panel draws electricity from the grid and distributes it to your outlets and appliances. Its capacity (measured in amps) indicates how much power your panel can draw from the grid at any given time.
If you have several high-power appliances running at the same time, it’s easy to exceed the capacity of a 60-amp panel. A 100-amp panel can meet your needs, but more Lehigh County residents are opting for 200-amp panels to anticipate future power use. Here’s why your electricity usage will likely increase in the future:
  • Summers keep getting hotter. This means your AC unit draws more power during the summer.
  • Heat pumps are replacing traditional gas-powered furnaces. They’re cheaper to operate, but you need a panel upgrade to power them.
  • The same goes for EV charging. You can save big at the pump, but you need a panel with enough capacity to charge your EV at home.
  • You likely have more electrical appliances and electronics than you did 10 years ago, and will continue to get more in the future. These can include tankless water heaters, electric cooking ranges, air fryers or smart home devices.
  • A panel with extra capacity can power a home extension. If you’re thinking about a finished basement or attic transformation, you’ll need a panel that can handle extra circuits.

Is It Time for a New Panel?

A qualified electrician can take a look at your infrastructure, do a load calculation, and let you know if getting a new panel makes sense.
If your current panel is overworked or outdated, you’ll likely see the following signs:
  • Your breakers are tripping more often.
  • The lights flicker, especially when another circuit or appliance comes online.
  • The panel might feel warm to the touch.
  • There might be a faint buzzing sound coming from the panel.
  • Your panel is full and cannot accommodate any additional circuits.
Some of these signs can be difficult to notice. If you have an older panel, it’s best to get a professional opinion from a licensed electrician.

Panel Upgrades and Modern Electrification

Once you have a new panel in place, it becomes easier to meet modern power demands without overloading your infrastructure.
You can comfortably power multiple circuits and appliances. You’ll also have extra room to add more circuits and do a few upgrades to your home, whether that’s adding an EV charger, a heat pump or running a circuit to a home addition.
Plus, an upgraded panel will boost your home value in the Allentown or Bethlehem market.

Plan Your Panel Upgrade With JAXSL

JAXSL is your trusted local electrician in Allentown and Bethlehem. We’ve been serving the area for many years and know all about the different types of construction common in the Lehigh Valley.
Give us a call at 844-452-9538 or contact us online if you’re wondering about your electrical panel. We’ll do an inspection and discuss whether upgrading it makes sense.

FAQ

What does a panel replacement entail?
A panel replacement involves removing your old breaker box and installing a modern unit that meets safety and capacity standards.
How much does a 200-amp panel upgrade cost in Pennsylvania?
Most Allentown and Bethlehem homeowners spend between $2,500 and $4,000 for a 200-amp electrical panel upgrade.
Do I need to upgrade my panel for an EV charger?
Yes. EV chargers require dedicated circuits, and many older panels can’t safely handle the extra load.

Blog post

Latest Article

Property owners are increasingly discovering that infrastructure installed around 2006…

4 MIN. READ Key Takeaways Commercial property owners should evaluate…

4 MIN. READ Key takeaways: Your electrical service line is…

4 MIN. READ Key takeaways: Breakers are more likely to…